Vol 4 No 6 (2012): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba
Published: 2013-02-04
Article
A case study on biomass burning in Vaidotai settlement
Abstract 453 | PDF Downloads 575 | DOI https://doi.org/10.3846/mla.2012.83
Page 519-522
Modelling a compliant-based precise positioning stage
Abstract 422 | PDF Downloads 308 | DOI https://doi.org/10.3846/mla.2012.84
Page 523-527
Paper and prints as composite materials
Abstract 499 | PDF Downloads 468 | DOI https://doi.org/10.3846/mla.2012.85
Page 528-532
Reasearch on personnel management problems in industrial enterprises across Lithuania and the ways to suggest innovative solutions
Abstract 559 | PDF Downloads 1150 | DOI https://doi.org/10.3846/mla.2012.86
Page 533-536
Research into the influence of the acoustic field on the efficiency of removing aerosols
Abstract 419 | PDF Downloads 308 | DOI https://doi.org/10.3846/mla.2012.87
Page 537-540
Theoretical questions of applying smart materials for microactuators
Abstract 424 | PDF Downloads 383 | DOI https://doi.org/10.3846/mla.2012.88
Page 541-545
Research into Ni-Cr-Si-B coating sprayed onto aluminium substrate using the method of plasma spray
Abstract 431 | PDF Downloads 310 | DOI https://doi.org/10.3846/mla.2012.89
Page 546-549
Preperation for a clean surface
Abstract 587 | PDF Downloads 464 | DOI https://doi.org/10.3846/mla.2012.90
Page 550-554
Research on the durability of the splints of lower limbs
Abstract 432 | PDF Downloads 276 | DOI https://doi.org/10.3846/mla.2012.91
Page 555-558
Research on vibration isolation systems used in laser and nanotechnologies
Abstract 440 | PDF Downloads 319 | DOI https://doi.org/10.3846/mla.2012.92
Page 559-563
Optimization of grillages using genetic algorithms for integrating MatLab and Fortran environments
Abstract 463 | PDF Downloads 341 | DOI https://doi.org/10.3846/mla.2012.93
Page 564-568
Quality analysis of cutting steel using laser
Abstract 523 | PDF Downloads 315 | DOI https://doi.org/10.3846/mla.2012.94
Page 569-572
Research on machining prototypes using an industrial robot
Abstract 450 | PDF Downloads 318 | DOI https://doi.org/10.3846/mla.2012.95
Page 573-578
Influence of cutting parameters on the surface roughness and hole diameter of drilling making parts of alluminium alloy
Abstract 463 | PDF Downloads 447 | DOI https://doi.org/10.3846/mla.2012.96
Page 579-582
Investigation into the accuracy of colours reproduced by the ricoh printer
Abstract 434 | PDF Downloads 249 | DOI https://doi.org/10.3846/mla.2012.97
Page 583-587
Research on the effectiveness of aerators
Abstract 427 | PDF Downloads 365 | DOI https://doi.org/10.3846/mla.2012.98
Page 588-592
Research on dynamic parameters and position accuracy of pneumatics muscles
Abstract 452 | PDF Downloads 301 | DOI https://doi.org/10.3846/mla.2012.99
Page 593-598
Research on the influence of an acoustic field on particle cohesion in liquid
Abstract 442 | PDF Downloads 265 | DOI https://doi.org/10.3846/mla.2012.100
Page 599-603
Research on the properties of thermal sprayed Ni-Cr-Si-Fe-B coatings
Abstract 453 | PDF Downloads 256 | DOI https://doi.org/10.3846/mla.2012.101
Page 604-607