Share:


Use of green building information modeling in the assessment of net zero energy building design

    Shang Yuan Chen Affiliation

Abstract

In the face of extreme climate, Net Zero Energy Buildings (NZEBs) represent a very high standard of building energy conservation. The design of NZEBs requires continuous design improvement and analysis in a decision-making process that seeks to meet energy conservation goals. This paper recommends the use of green Building Information Modelling (BIM) to support the design of zero-energy buildings. The design of NZEBs requires two sets of tasks: First, it requires determination of whether the building will offer high-energy efficiency, and, second, it lacks the installation of sufficient renewable energy equipment to meet the building’s load needs. After drawing on the spirit of the United States’ Leadership in Energy and Environmental Design and considering the current situation in Taiwan, this paper recommends the use of electricity Energy Usage Intensity as a measurement unit providing a holistic indicator of energy usage and takes optimized energy performance as a performance target for various solutions. This study demonstrated procedural steps in the application of green BIM and analyzed restrictions on the implementation of green BIM to the analysis of NZEB design.

Keyword : energy usage intensity (EUI), building information modeling (BIM), building performance analysis (BPA)

How to Cite
Chen, S. Y. (2019). Use of green building information modeling in the assessment of net zero energy building design. Journal of Environmental Engineering and Landscape Management, 27(3), 174-186. https://doi.org/10.3846/jeelm.2019.10797
Published in Issue
Sep 19, 2019
Abstract Views
2681
PDF Downloads
1525
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Andrasik, P. (2015). Building performance analytics: establishing a methodology of design integration. Journal of the National Institute of Building Science, 3(4), 28-30.

Annual Electrical Power Consumption by Building Occupants per Unit Area. (2015). Energy Bureau of the Ministry of Economic Affairs. Retrieved from http://www.ecct.org.tw/ReadFile/?p=Knowledge&n=4ccec70a-8a69-43f5-b9d4-3274271bd182.pdf

Ascione, F., Bianco, N., Böttcher, O., Kaltenbrunner, R., & Vanoli, G. P. (2016). Net-zero-energy buildings in Germany: design, model calibration, and lessons learned from a case-study in Berlin. Energy and Buildings, 133, 688-710. https://doi.org/10.1016/j.enbuild.2016.10.019

BREEAM. (2017). Retrieved from http://www.breeam.com/

Building Energy Software Tools. (2017). US Dept. of Energy. Retrieved from http://www.buildingenergysoftwaretools.com/

CASBEE. (2017). Institute for Building Environment and Energy Conversation. Retrieved from http://www.ibec.or.jp/CASBEE/

Crawley, D., Pless, S., & Torcellini, P. (2009). Getting to Net Zero, National Renewable Energy Laboratory (NREL). U.S. Department of Energy. http://www.nrel.gov/docs/fy09osti/46382.pdf

Deng, S., Wang, Z., & Dai, Y. J. (2014). How to evaluate the performance of net-zero energy building − a literature research. Energy, 71, 1-16. https://doi.org/10.1016/j.energy.2014.05.007

Desideri, U., Arcioni, L., Leonardi, D., Cesaretti, L., Perugini, P., Agabitini, E., & Evangelisti, N. (2014). Design of a multi-purpose “zero energy consumption” building according to European Directive 2010/31/EU: life cycle assessment. Energy and Buildings, 80, 585-597. https://doi.org/10.1016/j.enbuild.2014.05.027

Eastman, C. M. (2008). BIM Handbook: a guide to building information modeling for owners, managers, designers, engineers, and contractors. John Wiley & Sons, Inc. https://doi.org/10.1002/9780470261309

EEWH. (2017). Taiwan Architecture & Building Center. Retrieved from http://gb.tabc.org.tw/modules/news/article.php?storyid=5

Eleftheriadis, S., Mumovic, D., & Greening, P. (2017). Life cycle energy efficiency in building structures: a review of current developments and future outlooks based on BIM capabilities. Renewable and Sustainable Energy Reviews, 67, 811-825. https://doi.org/10.1016/j.rser.2016.09.028

Emilekfouri. (2013). Green Building Studio and Standard 140. Autodesk. Retrieved from http://blogs.autodesk.com/insight/green-building-studio-and-standard-140/

European Commission. (2017). Nearly zero-energy buildings. Retrieved from https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings/nearly-zero-energy-buildings

GB: Assessment standard for Green Building. (2014). Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Retrieved from http://baike.baidu.com/item/%E7%BB%BF%E8%89%B2%E5%BB%BA%E7%AD%91%E8%AF%84%E4%BB%B7%E6%A0%87%E5%87%86/241182

Green Building Studio. (2017). Building Performance Analysis Raised to the Power of the Cloud, Autodesk®. Retrieved from https://gbs.autodesk.com/GBS/

Green Star. (2017). Green Building Council Austria. Retrieved from http://new.gbca.org.au/green-star/

Gurgun, A. P., Polat, G., Damci, A., & Bayhan, H. G. (2016). Performance of LEED energy credit requirements in European countries. Procedia Engineering, 164, 432-438. https://doi.org/10.1016/j.proeng.2016.11.641

Intelligent building. (2017). Taiwan Architecture & Building Center. Retrieved from http://ib.tabc.org.tw/

Jalaei, F., & Jrade, A. (2015). Integrating building information modeling (BIM) and LEED system at the conceptual design stage of sustainable buildings. Sustainable Cities and Society, 18, 95-107. https://doi.org/10.1016/j.scs.2015.06.007

Japan Zero Energy Buildings. (2017). House Energy. Retrieved from http://www.house-energy.com/NZEB/Japan-ZNEB.html

LEED. (2017). U.S. Green Building Council. Retrieved from https://www.usgbc.org/leed

LEED: Energy and Atmosphere (EA) category. (2017). U.S. Green Building Council. Retrieved from https://www.usgbc.org/credits/new-construction/v4/energy-%26-atmosphere

LEED: Optimize energy performance. (2017). U.S. Green Building Council. Retrieved from https://www.usgbc.org/node/2614273?return=/credits/new-construction/v4/energy-%26amp%3B-atmosphere

Maile, T., Fischer, M., & Bazjanac, V. (2007). Building energy performance simulation tools − a life-cycle and interoperable perspective. Stanford University. Retrieved from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.486.4124&rep=rep 1&type=pdf

Malkin, S. (2008). Meteorological data for Building Energy Analysis. Autodesk®. Retrieved from http://sustainabilityworkshop.autodesk.com/sites/default/files/core-page-files/weather_data_greenbuildingstudio_adsk_white_paper.pdf

Marszal, A. J., Heiselberg, P., Bourrelle, J. S., Musall, E., Voss, K., Sartori, I., & Napolitano, A. (2011). Zero Energy Building – a review of definitions and calculation methodologies. Energy and Buildings, 43, 971-979. https://doi.org/10.1016/j.enbuild.2010.12.022

Mohamed, A., Cao, S., Hasan, A., & Sirén, K. (2014). Selection of micro-cogeneration for net-zero energy buildings (NZEB) using weighted energy matching index. Energy and Buildings, 80, 490-503. https://doi.org/10.1016/j.enbuild.2014.05.055

Net Zero Energy Commercial Building Initiative. (2017). U.S. Department of Energy. Retrieved from https://www1.eere.energy.gov/buildings/publications/pdfs/alliances/cbi_fs.pdf

Østergård, T., Jensen, R. L., & Maagaardb, S. E. (2016). Building simulations supporting decision making in early design – a review. Renewable, and Sustainable Energy Reviews, 61, 187-201. https://doi.org/10.1016/j.rser.2016.03.045

Ryu, H. S., Park, K. S., & Rosen, M. R. (2016). A Study on the LEED Energy Simulation Process Using BIM. Sustainability, 8(2), 1-13. https://doi.org/10.3390/su8020138

Sartori, I., Napolitano, A., & Voss, K. (2012). Net zero energy buildings: a consistent definition framework. Energy and Buildings, 48, 220-232. https://doi.org/10.1016/j.enbuild.2012.01.032

Shrestha, P. (2016). Lords reject government decision to scrap zero carbon homes. In Energy Live News. Retrieved from http://www.energylivenews.com/2016/04/28/lords-reject-government-decision-to-scrap-zero-carbon-homes/

Task 40. (2017). Net Zero Energy Solar Buildings. Retrieved from http://task40.iea-shc.org/

Torcellini, P., Pless, S., & Deru, M. (2006). Zero energy buildings: a critical look at the definition. National Renewable Energy Laboratory. Retrieved from http://www.nrel.gov/docs/fy06osti/39833.pdf

Xie, H. Z. (2011). The Zero Energy Building Technology Alliance (ZEBTA) established conference report. In Energy reports. Retrieved from http://www.zebta.org.tw/pdf/ZEBTA%20Cover%20story%20201108.pdf