Vol 19 No 1 (2013): Supplement
Published: 2014-01-09
Articles
Behaviour of composite plate girders with partial interaction
Abstract 518 | PDF Downloads 480 | DOI https://doi.org/10.3846/13923730.2013.801898
Page S1-S13
Effects of geogrid reinforcement in low volume flexible pavement
Abstract 673 | PDF Downloads 906 | DOI https://doi.org/10.3846/13923730.2013.793606
Page S14-S22
Combined 3D building surveying techniques – terrestrial laser scanning (TLS) and total station surveying for BIM data management purposes
Abstract 2055 | PDF Downloads 2490 | DOI https://doi.org/10.3846/13923730.2013.795187
Page S23-S32
Incorporation of rubber-steel bearing isolation in multi-storey muilding
Abstract 690 | PDF Downloads 612 | DOI https://doi.org/10.3846/13923730.2013.801904
Page S33-S49
Positive interaction of industrial and recycled steel fibres in fibre reinforced concrete
Abstract 971 | PDF Downloads 734 | DOI https://doi.org/10.3846/13923730.2013.802710
Page S50-S60
The effects of using recycled concrete on fatigue behavior of hot mix asphalt
Abstract 703 | PDF Downloads 651 | DOI https://doi.org/10.3846/13923730.2013.801892
Page S61-S68
Structural behaviour of fully coupled spar–mooring system under extreme wave loading
Abstract 553 | PDF Downloads 631 | DOI https://doi.org/10.3846/13923730.2013.801899
Page S69-S77
A new design equation for prediction of ultimate bearing capacity of shallow foundation on granular soils
Abstract 718 | PDF Downloads 1264 | DOI https://doi.org/10.3846/13923730.2013.801902
Page S78-S90
A comprehensive framework for evaluating key project requirements
Abstract 732 | PDF Downloads 667 | DOI https://doi.org/10.3846/13923730.2013.801903
Page S91-S105
Semi-ideal Bidding via a fuzzy TOPSIS project evaluation framework in risky environments
Abstract 641 | PDF Downloads 529 | DOI https://doi.org/10.3846/13923730.2013.801884
Page S106-S115
Identification of the most important factors in the compaction process
Abstract 505 | PDF Downloads 427 | DOI https://doi.org/10.3846/13923730.2013.801893
Page S116-S124
The effect of cement modification on the rheological properties of cement paste
Abstract 513 | PDF Downloads 609 | DOI https://doi.org/10.3846/13923730.2013.851111
Page S125-S130
Statistical evaluation of pre-selection criteria for industrialized building system (IBS)
Abstract 800 | PDF Downloads 712 | DOI https://doi.org/10.3846/13923730.2013.801921
Page S131-S140
Reinforced and prestressed concrete hollow beams under torsion
Abstract 585 | PDF Downloads 723 | DOI https://doi.org/10.3846/13923730.2013.801895
Page S141-S152
Comparison of surface macrotexture measurement methods
Abstract 646 | PDF Downloads 1174 | DOI https://doi.org/10.3846/13923730.2013.802732
Page S153-S160
Lifecycle energy consumption prediction of residential buildings by incorporating longitudinal uncertainties
Abstract 625 | PDF Downloads 429 | DOI https://doi.org/10.3846/13923730.2013.802744
Page S161-S171
Adoption processes for EDM, EDI and BIM technologies in the construction industry
Abstract 1086 | PDF Downloads 968 | DOI https://doi.org/10.3846/13923730.2013.801888
Page S172-S187
Highway infrastructure health monitoring using micro-electromechanical sensors and systems (MEMS)
Abstract 950 | PDF Downloads 728 | DOI https://doi.org/10.3846/13923730.2013.801894
Page S188-S201
Predicting project success in construction using an evolutionary Gaussian process inference model
Abstract 580 | PDF Downloads 528 | DOI https://doi.org/10.3846/13923730.2013.801919
Page S202-S211
A method for linking safety factor to the target probability of failure in fire safety engineering
Abstract 732 | PDF Downloads 842 | DOI https://doi.org/10.3846/13923730.2013.802718
Page S212-S221